高输出功率小功率经过多次实验发现仪（耐焊弧经过多次实验发现仪）-（算起机的控制）

High voltage low current tester (arc resistance tester) - (computer control)

好产商品品牌称：耐电弧试验机

Product name: electric arc resistance tester

护肤品款型：NDH-A

Product model: NDH - A

足够标准化：GB/T 1411-2002《固体颗粒绝缘层材质耐高压得很低的交流电电弧焊接释放电能的可靠性试验》（就是指IEC  61621-1997）及ASTM D495等规范的必须设计制作制造出的，并符合要求IEC 149、UL 746A等校正最简单的方法

Meet the standards: GB/T 1411-1411 "solid insulating material resistant to high voltage low current arc discharge test" (equivalent to IEC 61621-1997) and the requirements of standards such as ASTM D495 design and manufacturing, and conform to the IEC 149, UL 746 a test method, etc

一 概述

一An overview of the

大部分用于标准及性能：

本试验报告机是都按照利用作交流接触器、机械和家庭型机械等业内的安装电工用泡沫泡沫塑料、不饱和树酯胶和耐压漆等耐压原素材的耐电孤功效评判，主用作固状耐压原素材如：泡沫泡沫塑料、胶片、不饱和树酯、白云母、瓷砖、窗户玻璃、耐压油、耐压漆、纸壳等材质的耐电孤功效公测；

本工作机由运算机把握自动运行，可不可以屏幕上显示现阶段工作模式及工作用时，工作完结后并保留现阶段工作数据显示，并可直接打印.的标准实验英文汇报。

Main scope of application and features:

This machine is in accordance with the applied in motor, electrical appliances and household appliances and other industries with varnish insulation materials such as plastic, resin adhesive and the arc resistance evaluation, the main used for solid insulating material such as plastic, film, resin, mica, ceramic, glass, insulating oil, insulating paint, such as cardboard medium arc resistance test;

This testing machine controlled by computer operation, can display the current experimental condition and experimental time, after the experiment, and save the current experimental data and can be printed. Standard experiment report 

二 功能特点

1 该设备为左右两一身形式，下面为操控程序，上端为现场实验箱。

2 本食品进行*新自动化保持工艺，凭借选流程（IEC或ASTM）可自动的开展试验报告，并在新电脑端提示 可靠性试验时候和数据。

3 **特性较好，抗抑制效率强，测式gps精值高。

二：Functional features：

1 this machine is up and down a body structure, lower for the operating system, the upper part of test cases.

2 this product USES the latest intelligent control technology, through the selection process (IEC) or ASTM test can be automatically, and displayed on the computer and the test process and results.

3 good safety performance, strong anti-interference ability, high test precision. 

三 主要技术参数

1 电弧焊接通断时段误差度：高于 ±10ms

2 调压器存储容量：2kVA

3 额定功率试验台的电压：12.5kV

4 试验装置额定电压gps精度：±3%

5 直流电掌控线性度：±10%  直流电压在线测量控制精度：1.5%

6 电级对试板压：（0.5±0.05）N

7 工业建材：钨棒

8 电极材料距离感：（6.35±0.1）mm（IEC）

               （6.0±0.1）mm（ASTM）

9 运用环保高温：（23±2）℃

10 适用的环境室内湿度：（50±5）%

11 外接电源：220V±5%  50Hz  10A

12 检测    做法：   国家行业标准/美标/10 mA 连续不断/20 mA 连续不断/30 mA维持/40 mA多次

13 现场实验系统程序正确：

Three main technical parameters：

Error: 1 arc on-off time less than plus or minus 10 ms

Transformer capacity: 2 kva

3 test voltage rating: 12.5 kV

4: test voltage accuracy + / - 3%

5 current control accuracy: plus or minus 10% current measuring accuracy: 1.5%

6 electrode pressure on sample: (0.5 + 0.5) N

7 electrode materials: tungsten rods

8 electrode distance: 6.35 + / - 0.1 mm (6.0 + 0.1) mm (IEC) (ASTM)

9 using the environment temperature (23 + 2) ℃

10 use environment humidity: (50 + 5) %

Power supply: 220 v + 5% for 50 hz 10 a

Test method: beautiful mark / 10 gb / 30 mA mA continuous / 20 mA continuous/continuous / 40 mA continuous

13 test procedure is as follows:

Procedures section of the arc current

MA arc on-off time s the program s test total duration time s

IEC 61621 ASTM D495

1 1/8 10 s on 7/8 s broken 1/4 7/4 break 60 s 60 s

2 10 1/4 "s pass 3/4 s 1/4 3/4 break 60 s 120 s

3 to 10 1/4 "s make a quarter s break a quarter of a quarter break 60 s 180 s

4 consecutive 10 to 60, 240

5 20 consecutive 60, 300

30 consecutive 6 to 60, 360

7 consecutive 40 to 60, 420 

四  配置

Four configuration：

Serial number name number note

01 arc resistance tester

02 a electrode system

03 electrode bearing a set

04 a set of power cable

05 ground put a rod

06 milliammeter current one

7 a set of computer measurement and control software

08 specimen holder a

09 electrode distance standard 2 blocks

Standard 2 blocks of 10 Angle

11 ceramic pieces 2 pieces

12 one brand inkjet printer

13 1 computer brand

14 1 instruction manual

15 1 certificate

五 好产品规格：

NDH-A    耐弧光疲劳试验仪-微机把握

NDH-B    耐电孤耐压仪-触屏屏把控好

Five product model:

NDH - A arc resistance tester - microcomputer control

NDH - B arc resistance tester - touch screen control
ASTMD495耐高压低电流电弧放电试验机详情可以随时来电咨询！